Contract 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 2

Contract Overview

Balance:
0 BNB
Txn Hash Method
Block
From
To
Value [Txn Fee]
0x8672e72b838cfc94aee1160bcf99390dd2c307fb4b7826d7c1f4a4bc8124c55cTransfer Token119517152021-08-31 6:30:0619 days 8 hrs ago0xabe19fbb6753118fbe181227c0d80cf3a2d8bc7f IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0006347
0x3bf5b2e9a2231228fe4b96a0a5933e1dda57a1927e306ce923f2639243e50430Transfer Token118095302021-08-26 7:52:4424 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0xf56ea6a4c96ed561287fb62284ae3870d5ea02cf5630dd9a06012020f9eef066Transfer Token118095222021-08-26 7:52:2024 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0xd7db47e246ec363c3ea03bd8c7f7100976034925942ac6578455e989696f13d5Transfer Token118095112021-08-26 7:51:4724 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0x8ee08439633450e63536744dd0ae34dbd495e760cf89a00f00316370d3258941Transfer Token118095082021-08-26 7:51:3824 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0xcc5e0e2a0ac43f4a3c63cdce34806d8b29554026fe443df9b5ea6f9fe68198e0Transfer Token118095052021-08-26 7:51:2924 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0x29b10cdf3e391e18524bfd8f12322a0cd05d17ef9681481c67e5c6b643ed8373Transfer Token118094992021-08-26 7:51:1124 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0xff68f5d5bad3bfe0d6e4acbf49fc5c5710c28a56621948400be9290964a72132Transfer Token118094922021-08-26 7:50:5024 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0x13baae2690f10f15cf1cc7233a51f7bf3df2ee5de8a6ed43e61202db719094c9Transfer Token118094872021-08-26 7:50:3524 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0x7a16f417f4861f29bbba14125e9a5a24d4495f9c6f457a2cac1fb9a1fc5eed73Transfer Token118094802021-08-26 7:50:1424 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0x0707e5e5d4a1247cc4ac7d3bf81dcb13a1118a506f17b272fb9475a3eedd4d4aTransfer Token118094722021-08-26 7:49:5024 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0x826b63991c1bdcb11124bd9e7beab129a18d54474fad25d94361179d20a0f057Transfer Token118094652021-08-26 7:49:2924 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0x9c3917766aac85a1f8d1e9d43c20a0a3a54e8d705ce60a29997cdb417ca10741Transfer Token118094582021-08-26 7:49:0824 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0xb9f8e7d9cecdf69cadb562e4d6c4d36f7e03db7729a4a9e00d13c2642d664c67Transfer Token118094512021-08-26 7:48:4724 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0xe1e77560eabf1e6bd5a67b57372592522517cd3c34eed40a6c1798adb27853baTransfer Token116100542021-08-19 8:11:3931 days 7 hrs ago0x4ea3da7191ad1550ddd59f03fdbc8709c56c5aa2 IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0x3455f82c160b699ec6c1e5e4b546df0500463aef51a37f34cd098f86fc138d4dTransfer Token116100072021-08-19 8:09:1831 days 7 hrs ago0x4ea3da7191ad1550ddd59f03fdbc8709c56c5aa2 IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0006347
0x2c43b548685c36dc702bff525b996bb48bd3ec9af35ecb06de7893b28e3298b5Transfer Token116095662021-08-19 7:46:5331 days 7 hrs ago0xec9ac4c7430ab5dac8d5575dd280b2dd84a84105 IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0xf8f24b071ff6b7bab86a7e108ddb24ff28e0ea2acfcfaec199455e2c592f792eTransfer Token116095582021-08-19 7:46:2931 days 7 hrs ago0xec9ac4c7430ab5dac8d5575dd280b2dd84a84105 IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0006347
0xaa3baa8ba5eee4efd96c219f7e9a9131410fbed3cebc86b769715771e3d0a117Transfer Token116092822021-08-19 7:30:2831 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0x6f2e889604cdeedf2f03c9836990cf9be5e8c5d4e606470d6226ee87c82934ceTransfer Token116092722021-08-19 7:29:4631 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0x2663fc36db0dad9d42326bb27fa65a86c7dd8ea6d49de7cc5f91ec223a310f2dTransfer Token116092652021-08-19 7:29:2531 days 7 hrs ago0xe753d656751651d3f41c7788130c331f4e51a66b IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0006347
0x865bea9badfe6c0264442b48f84bc9874a3bf3a35a1e4148baccbb93ac49e995Transfer Token115917812021-08-18 16:40:4331 days 22 hrs ago0xfa95c6ec1f7a6b1fe13e20ca4772889001995cb7 IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0xd6901a1fa69e3d5464cdde7c2c2519577310e727b2ac5b9b7fde3778b5597a99Transfer Token115917722021-08-18 16:40:1631 days 22 hrs ago0xfa95c6ec1f7a6b1fe13e20ca4772889001995cb7 IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0004847
0x2d1e4c8c8cda01ca174091bbc3b390604a107989467d439950ae7bc851ea2aa9Transfer Token115917362021-08-18 16:38:2831 days 22 hrs ago0xfa95c6ec1f7a6b1fe13e20ca4772889001995cb7 IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.0006347
0x7af99f73380cae506d7b91872654771d922e382dc4aea9134cbbd40dc81481daTransfer Token115288942021-08-16 11:39:2634 days 3 hrs ago0x7b6cb0ddb5ed2511a060132e3d661bd7580fc700 IN  0xbe8ae629d020db86992a7da4e95886d2461fa4cd0 BNB0.00048458
[ Download CSV Export 
Latest 25 internal transaction
Parent Txn Hash Block From To Value
0x8672e72b838cfc94aee1160bcf99390dd2c307fb4b7826d7c1f4a4bc8124c55c119517152021-08-31 6:30:0619 days 8 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x3bf5b2e9a2231228fe4b96a0a5933e1dda57a1927e306ce923f2639243e50430118095302021-08-26 7:52:4424 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0xf56ea6a4c96ed561287fb62284ae3870d5ea02cf5630dd9a06012020f9eef066118095222021-08-26 7:52:2024 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0xd7db47e246ec363c3ea03bd8c7f7100976034925942ac6578455e989696f13d5118095112021-08-26 7:51:4724 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x8ee08439633450e63536744dd0ae34dbd495e760cf89a00f00316370d3258941118095082021-08-26 7:51:3824 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0xcc5e0e2a0ac43f4a3c63cdce34806d8b29554026fe443df9b5ea6f9fe68198e0118095052021-08-26 7:51:2924 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x29b10cdf3e391e18524bfd8f12322a0cd05d17ef9681481c67e5c6b643ed8373118094992021-08-26 7:51:1124 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0xff68f5d5bad3bfe0d6e4acbf49fc5c5710c28a56621948400be9290964a72132118094922021-08-26 7:50:5024 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x13baae2690f10f15cf1cc7233a51f7bf3df2ee5de8a6ed43e61202db719094c9118094872021-08-26 7:50:3524 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x7a16f417f4861f29bbba14125e9a5a24d4495f9c6f457a2cac1fb9a1fc5eed73118094802021-08-26 7:50:1424 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x0707e5e5d4a1247cc4ac7d3bf81dcb13a1118a506f17b272fb9475a3eedd4d4a118094722021-08-26 7:49:5024 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x826b63991c1bdcb11124bd9e7beab129a18d54474fad25d94361179d20a0f057118094652021-08-26 7:49:2924 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x9c3917766aac85a1f8d1e9d43c20a0a3a54e8d705ce60a29997cdb417ca10741118094582021-08-26 7:49:0824 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0xb9f8e7d9cecdf69cadb562e4d6c4d36f7e03db7729a4a9e00d13c2642d664c67118094512021-08-26 7:48:4724 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0xe1e77560eabf1e6bd5a67b57372592522517cd3c34eed40a6c1798adb27853ba116100542021-08-19 8:11:3931 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x3455f82c160b699ec6c1e5e4b546df0500463aef51a37f34cd098f86fc138d4d116100072021-08-19 8:09:1831 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x2c43b548685c36dc702bff525b996bb48bd3ec9af35ecb06de7893b28e3298b5116095662021-08-19 7:46:5331 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0xf8f24b071ff6b7bab86a7e108ddb24ff28e0ea2acfcfaec199455e2c592f792e116095582021-08-19 7:46:2931 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0xaa3baa8ba5eee4efd96c219f7e9a9131410fbed3cebc86b769715771e3d0a117116092822021-08-19 7:30:2831 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x6f2e889604cdeedf2f03c9836990cf9be5e8c5d4e606470d6226ee87c82934ce116092722021-08-19 7:29:4631 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x2663fc36db0dad9d42326bb27fa65a86c7dd8ea6d49de7cc5f91ec223a310f2d116092652021-08-19 7:29:2531 days 7 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x865bea9badfe6c0264442b48f84bc9874a3bf3a35a1e4148baccbb93ac49e995115917812021-08-18 16:40:4331 days 22 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0xd6901a1fa69e3d5464cdde7c2c2519577310e727b2ac5b9b7fde3778b5597a99115917722021-08-18 16:40:1631 days 22 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x2d1e4c8c8cda01ca174091bbc3b390604a107989467d439950ae7bc851ea2aa9115917362021-08-18 16:38:2831 days 22 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
0x7af99f73380cae506d7b91872654771d922e382dc4aea9134cbbd40dc81481da115288942021-08-16 11:39:2634 days 3 hrs ago 0xbe8ae629d020db86992a7da4e95886d2461fa4cd 0xdb16bfda8bc8ec987cecbfd2d3292a47f6a9ec530 BNB
[ Download CSV Export 
Loading

Contract Source Code Verified (Exact Match)

Contract Name:
AlleyTokenTransfer

Compiler Version
v0.7.4+commit.3f05b770

Optimization Enabled:
No with 200 runs

Other Settings:
default evmVersion, MIT license

Contract Source Code (Solidity)

/**
 *Submitted for verification at BscScan.com on 2021-05-21
*/

// File: openzeppelin-solidity/contracts/GSN/Context.sol

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount)
        external
        returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File: openzeppelin-solidity/contracts/math/SafeMath.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(
                amount,
                "ERC20: transfer amount exceeds allowance"
            )
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue)
        public
        virtual
        returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].add(addedValue)
        );
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue)
        public
        virtual
        returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].sub(
                subtractedValue,
                "ERC20: decreased allowance below zero"
            )
        );
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(
            amount,
            "ERC20: transfer amount exceeds balance"
        );
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(
            amount,
            "ERC20: burn amount exceeds balance"
        );
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// File: openzeppelin-solidity/contracts/access/Ownable.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address public _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: openzeppelin-solidity/contracts/utils/Address.sol

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) =
            target.call{value: value}(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data)
        internal
        view
        returns (bytes memory)
    {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/SafeERC20.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transfer.selector, to, value)
        );
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
        );
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.approve.selector, spender, value)
        );
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance =
            token.allowance(address(this), spender).add(value);
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance =
            token.allowance(address(this), spender).sub(
                value,
                "SafeERC20: decreased allowance below zero"
            );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata =
            address(token).functionCall(
                data,
                "SafeERC20: low-level call failed"
            );
        if (returndata.length > 0) {
            // Return data is optional
            // solhint-disable-next-line max-line-length
            require(
                abi.decode(returndata, (bool)),
                "SafeERC20: ERC20 operation did not succeed"
            );
        }
    }
}

// File: contracts/EarlyBackersVesting.sol

//SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;

contract AlleyTokenTransfer {
    IERC20 token;
    uint256 tokenToBeTranfered = 100 * 10**18;
    constructor(IERC20 _token){
        token=_token;
    }
    
    function transferToken(address from,address to) public payable {
         token.transferFrom(from,to,tokenToBeTranfered);
    }
   
}

Contract ABI

[{"inputs":[{"internalType":"contract IERC20","name":"_token","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"}],"name":"transferToken","outputs":[],"stateMutability":"payable","type":"function"}]

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

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

000000000000000000000000db16bfda8bc8ec987cecbfd2d3292a47f6a9ec53
-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000db16bfda8bc8ec987cecbfd2d3292a47f6a9ec53


Deployed ByteCode Sourcemap

35560:308:0:-:0;;;;;;;;;;;;;;;;;;;;;35731:129;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;35806:5;;;;;;;;;;:18;;;35825:4;35830:2;35833:18;;35806:46;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;35731:129;;:::o

Swarm Source

ipfs://5cafd973f98d8400df948b582e8cb7cb5ecd7ff4b8da6a7e48641a5d0f4615bd
Block Transaction Gas Used Reward
Age Block Fee Address BC Fee Address Voting Power Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading